$150.00 - $185.00
So, you have disc brakes, and only the best is good enough for you. Now, you can mount a Tubus carrier on your bike. Their Disco is designed to be combined with disc brakes. Instead of using added accessories, the Disco simply fits onto your frame. The carrier is easy to mount using the included quick release, or it can also be mounted on eyelets of the frame. Simply load up your bike and go. - Includes QR Skewer
The Cargo Rack is a robust rear rack for Tern bikes. Constructed of thick-gauge aluminum tubing with ultra-rigid DoubleTruss 3D design, the rack supports it all—full-sized panniers on upper or lower rails and KLICKfix Rackpack compatible baskets and trunk bags. Delivering 55 lb load capacity and our unique SideStrap anti-roll anchoring system to keep cargo tied down securely, the Cargo Rack is our strongest and most versatile rack ever. - Rigid DoubleTruss 3D design - KLICKfix Rackpack compatible - Optimized for kid-carrying, with the Yepp Maxi EasyFit child seat - Mount trunk bags or baskets to top deck, and panniers on lower rails - Lower rails keep panniers further back for greater heel clearance - Anchor points keep pannier bags from sliding - Built-in light/reflector mount with internal cable routing for powered rear light - Adjustable height clearance
The Hauler Rack is the Goldilocks of our front racks: Big enough to carry a whole lot of cargo but small enough to let you maneuver the bike with ease, it is just the right size for the Tern GSD and HSD. With an open-ended design and a handy bungee cord, the Hauler Rack is ready to carry backpacks, boxes, and other bulky items. And with mounting holes on the base, you can easily bolt a crate to the rack for a semi-permanent solution to carry groceries or smaller items. - Frame-mounted, designed to transport up to 20kg (44 lb) - Goldilocks-sized: Big enough to carry lots of cargo, small enough not to hinder maneuverability - Hauls anything from large boxes to odd-shaped items - Includes four mounting holes, ideal for attaching crates - Includes two rear-facing bottle cage mounts - Compatible with Tern bikes equipped with a Combo Mount - Fits the Tern GSD and HSD without increasing the overall length of the bike - Compatible with Quick Release CMT for easy installation/removal in under a minute
The Luggage Truss CMT lets you mount cargo on the bike frame instead of the front fork, for improved steering stability and a wobble-free ride. Compatible only with Tern bikes equipped with the robust Combo Mount—such as the GSD and the BYB. - Keeps weight on the frame instead of the fork, for uncompromised steering - KLICKfix-compatible, with a quick-release to attach or detach bags, baskets and racks - Integrated lock for security - Updated design using formed aluminum plate for strength and stiffness - Low profile design doesn’t affect bike folded size - Requires Tern’s Combo Mount - Load capacity: 7 kg (15.4 lb)
The Transporteur Rack is a modular cargo carrier. Accessorize it with a 300 × 400 mm Eurocrate, a standard crate of 20 beers, or a recycled wooden box. It carries up to 20 kg, so even when you’re carting two kids on the back, you can bring a picnic too. With two convenient bottle mounts, you can load it out with water for a long tour, or a handy bike lock for commuting in the city. - Robust front cargo carrier, designed to transport up to 20 kg ( 44 lb) - Installs on Tern’s robust Combo Mount, for serious hauling - Mounts on the frame (instead of the fork) for unencumbered handling, even under heavy loads - Built to fit standard 300 × 400 mm Eurocrates, beer crates and a range of third party accessories including pet carriers and coolers - Includes two rear-facing bottle cage mounts, so you can load up on water or attach a convenient folding lock
The Roll Rack fits all Specialized Roll models, as well as most bikes with a 650b wheel size. The rack also features a maximum load capacity of 15kg, and it includes a steel bracket, hook plate, and corrosion-resistant hardware. - Fits all Specialized Roll models, as well as most bikes with a 650b wheel size. - Includes a steel bracket, hook plate, and corrosion-resistant hardware. - Maximum load capacity: 15kg
Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.
$49.99 - $50.00
You'll keep on keepin' on with Planet Bike's K.O.K.O. Cargo Rack on your bike. Made of 6061 aluminum for maximum strength and stability, it boasts a wide range of adjustability so it's easy to install and fits most bicycles. There's a taillight mount, too (lights sold separately).
Topeak's Disc-Mount Rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. And, this tubular aluminum rack features tabs that clear most disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger or extra storage room.
Topeak's BabySeat II rear rack allows you to easily mount your BabySeat II (sold separately) to your 29er. This tubular aluminum rack features tabs that clear most rear disc brake mounts so you can use your disc brake-equipped bike to run errands with your favorite little passenger.
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity
- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity
- This one size fits all tubular aluminum rear rack is designed for Fat bikes with disc brakes - Adjustable rack legs fit most 24" & 26" Fat bikes - Integrated side bar provides a lower pannier attachment for more cargo on top of the rack - The MTX 2.0 QuickTrack plate is compatible with any Topeak MTX trunk bag, MTX rear basket, and most other rack packs and panniers on the market - Not compatible with asymmetric rear stay design Fat bike frames - Includes extra-long mounting bracket and rear light mount - Max weight 55lbs - 16.9 x 13.4 x 11.4" - 2.79lbs
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams
Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.
- The perfect quick-mount front rack system for road, cross, hybrid or touring bikes with rigid forks. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.
- The perfect quick-mount rear rack system attaches to road, cross, hybrid or touring bike seatstays. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.
The perfect quick-mount rear rack system attaches to MTB full suspension seatstays or hardtail MTB without rack eyelets. This one-size-fits-all front rack features an innovative top plate that adjusts levels independently of the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags. - Attachments: Seatstays with hook-and loop-straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags, KLICKfix / RackTime Snapit or Vario system bags - Max Load: 12kg / 26lb - Clamp for rear reflector - Size: 42 x 33. 2 x 14.5cm / 16.5" x 13.1" x 5.7" - Weight: 960g / 2.12lb
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material
If you like to ride useful bikes, racks make a lot of sense. Surly's 24-Pack Rack ups the useable cargo space on your bike, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from cromoly tubing and uses stainless steel hardware. And it offers height adjustability, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons, too, so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore bottom, so take your stuff out of that messenger bag and put it on the front of your bike. The 24-Pack Rack is rated to carry 30lbs (13.6kg) and comes in black or silver.
Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home, or pick up a nice bouquet of flowers. For whatever the situation dictates, Surly offers the 8-Pack Rack. Made from the same tubular cromoly steel as their front and rear touring racks, the 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudiere, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can possibly find. It’s rated to carry up to 30lbs (13.6 kg) and comes in black or silver.
Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g
This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.
Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag
We designed the Surly TV Tray to help riders boost the capacity of their current rack setups. Designed for easy pairing with nearly all Surly racks and most other racks on the market, mount this sturdy aluminum platform on top of your current rack to provide a footprint large enough for 30 lbs. of beef jerky, 9-volt batteries, used pinball parts, or whatever else you might need to haul. Available in dark black. - Load weight limit 30 lbs. - 15-3/8 x 10-inches - Rack weight 650g - 6061-TB Aluminum - Not compatible with Surly 24-Pack Rack or Wide Rear Disc Rack - Mounting Hardware Included
The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g
The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.
Page 1 of 3 Next page